Oc DFI P45 T2RS...

[hanson]

Tweet

ane juga baru ganti DFI LP DK P45T2RS
liat BIOS nya langsung jadi pusing
hasil utak2 utik 3 hari baru dapat segini

Hidden

pake setinggan ini

Hidden

Genie BIOS Setting

Exit Setup shutdown........................... - Mode 2
Shutdown after AC loss........................ - Enabled
AC Shutdown free.............................. - Enabled
O.C. Fail retry Counter....................... - 1
O.C. Fail CMOS Reload......................... - Disabled
CPU Clock Ratio............................... - 12.5X
CPU N/2 Ratio................................. -  Enabled
Target CPU Clock.............................. - 3812 MHz
CPU Clock..................................... - 305 MHz
Boot Up Clock................................. - Auto
CPU Clock Amplitude........................... - 800mV
CPU Clock0 Skew............................... -   0ps
CPU Clock1 Skew............................... -   0ps
DRAM Speed.................................... - 266/800
Target DRAM Speed............................. - DDR2 917
PCIE Clock.................................... - 100 MHz

CPU Spread Spectrum........................... - Disabled
PCIE Spread Spectrum.......................... - Disabled


CPU Feature

Thermal Management Control.................... - Disabled
PPM (EIST)Mode................................ - Disabled
Limit CPUID MaxVal............................ - Disabled
C1E Function.................................. - Disabled
Execute Disable Bit........................... - Disabled
Virtualization Technology..................... - Disabled
Core Multi-Processing......................... - Enabled


DRAM Timing

Enhance Data Transmitting..................... - Fast
Enhanced Addressing........................... -Fast
T2 Dispatch................................... - Auto

Flex Memory Mode.............................. - Auto
CAS Latency Time (tCL)........................ - 5
RAS# to CAS# Delay (tRCD)..................... - 5
RAS# Precharge (tRP).......................... - 5
Precharge Delay (tRAS)........................ - 15
All Precharge to ACT.......................... - Auto
REF to ACT Delay (tRFC)....................... -Auto
Performance LVL (Read Delay).................. Auto
Write to PRE Delay (tWR)...................... - Auto
Rank Write to Read (tWTR)..................... - Auto
ACT to ACT Delay (tRRD)....................... -Auto
Read to Write Delay (tRDWR)................... - Auto
Ranks Write to Write (tWRWR).................. - Auto
Ranks Write to Read (tWRRD)................... -Auto
Read CAS# Precharge (tRTP).................... - Auto
All PRE to Refresh............................ - Auto



Clock Setting Fine Delay

DLL and RCOMP Settings........................ - Auto
CH1 DRAM Default Skew......................... - Model 3
CH2 DRAM Default Skew......................... - Model 3
RCOMP Setting................................. - Model 1

Fine Delay Step Degree........................ - 70ps

Ch1 Clock Crossing Setting.................... - Auto
DIMM 1 Clock fine delay....................... - current 
DIMM 2 Clock fine delay....................... - current 
Ch1 Control0 fine delay....................... - current 
Ch1 Control1 fine delay....................... - current 
Ch1 Control2 fine delay....................... - current 
Ch1 Control3 fine delay....................... - current 
Ch1 Command fine delay........................ - current 

Ch2 Clock Crossing Setting.................... - Auto
DIMM 3 Clock fine delay....................... - current 
DIMM 4 Clock fine delay....................... - current 
Ch2 Control0 fine delay....................... - current 
Ch2 Control1 fine delay....................... - current 
Ch2 Control2 fine delay....................... - current 
Ch2 Control3 fine delay....................... - current 
Ch2 Command fine delay........................ - current 

Ch1Ch2 Common Clock Setting................... - Auto

Ch1 RDCAS GNT-Chip Delay...................... - Auto
Ch1 WRCAS GNT-Chip Delay...................... - Auto
Ch1 Command to CS Delay....................... - Auto

Ch2 RDCAS GNT-Chip Delay...................... - Auto
Ch2 WRCAS GNT-Chip Delay...................... - Auto
Ch2 Command to CS Delay....................... - Auto


Read Delay Phase Adjust

Ch1 Read delay phase (4~0)     
Channel 1 Phase 0 Pull-In..................... - Auto
Channel 1 Phase 1 Pull-In..................... - Auto
Channel 1 Phase 2 Pull-In..................... - Auto
Channel 1 Phase 3 Pull-In..................... - Auto
Channel 1 Phase 4 Pull-In..................... - Auto


Ch2 Read delay phase (4~0)     
Channel 2 Phase 0 Pull-In..................... - Auto
Channel 2 Phase 1 Pull-In..................... - Auto
Channel 2 Phase 2 Pull-In..................... - Auto
Channel 2 Phase 3 Pull-In..................... - Auto
Channel 2 Phase 4 Pull-In..................... - Auto



Voltage Setting

CPU VID Special Add........................... - +237.5mV
DRAM Voltage Control.......................... - 2.100V
SB Core/CPU PLL Voltage....................... - 1.55V
NB Core Voltage............................... - 1.1825
CPU VTT Voltage............................... - 1.10V
Vcore Droop Control........................... - Enabled
Clockgen Voltage Control...................... - 3.45V
CPU GTL 0/2 REF Volt.......................... - 0.67X
CPU GTL 1/3 REF Volt.......................... - 0.67X
North Bridge GTL REF Volt..................... - 0.67X
FSB Vref...................................... - 2A

Kalau mau lebih jelas mungkin bisa baca2 disini
http://www.clunk.org.uk/forums/overc...s-dfi-add.html

Waduh sadis oc nya... mantap bro! lg dapet procie bagus ya? vcore bisa low gitu hehe awesome.

[ango]

Tweet

ane juga baru ganti DFI LP DK P45T2RS
liat BIOS nya langsung jadi pusing
hasil utak2 utik 3 hari baru dapat segini

Hidden

pake setinggan ini

Hidden

Genie BIOS Setting

Exit Setup shutdown........................... - Mode 2
Shutdown after AC loss........................ - Enabled
AC Shutdown free.............................. - Enabled
O.C. Fail retry Counter....................... - 1
O.C. Fail CMOS Reload......................... - Disabled
CPU Clock Ratio............................... - 12.5X
CPU N/2 Ratio................................. -  Enabled
Target CPU Clock.............................. - 3812 MHz
CPU Clock..................................... - 305 MHz
Boot Up Clock................................. - Auto
CPU Clock Amplitude........................... - 800mV
CPU Clock0 Skew............................... -   0ps
CPU Clock1 Skew............................... -   0ps
DRAM Speed.................................... - 266/800
Target DRAM Speed............................. - DDR2 917
PCIE Clock.................................... - 100 MHz

CPU Spread Spectrum........................... - Disabled
PCIE Spread Spectrum.......................... - Disabled


CPU Feature

Thermal Management Control.................... - Disabled
PPM (EIST)Mode................................ - Disabled
Limit CPUID MaxVal............................ - Disabled
C1E Function.................................. - Disabled
Execute Disable Bit........................... - Disabled
Virtualization Technology..................... - Disabled
Core Multi-Processing......................... - Enabled


DRAM Timing

Enhance Data Transmitting..................... - Fast
Enhanced Addressing........................... -Fast
T2 Dispatch................................... - Auto

Flex Memory Mode.............................. - Auto
CAS Latency Time (tCL)........................ - 5
RAS# to CAS# Delay (tRCD)..................... - 5
RAS# Precharge (tRP).......................... - 5
Precharge Delay (tRAS)........................ - 15
All Precharge to ACT.......................... - Auto
REF to ACT Delay (tRFC)....................... -Auto
Performance LVL (Read Delay).................. Auto
Write to PRE Delay (tWR)...................... - Auto
Rank Write to Read (tWTR)..................... - Auto
ACT to ACT Delay (tRRD)....................... -Auto
Read to Write Delay (tRDWR)................... - Auto
Ranks Write to Write (tWRWR).................. - Auto
Ranks Write to Read (tWRRD)................... -Auto
Read CAS# Precharge (tRTP).................... - Auto
All PRE to Refresh............................ - Auto



Clock Setting Fine Delay

DLL and RCOMP Settings........................ - Auto
CH1 DRAM Default Skew......................... - Model 3
CH2 DRAM Default Skew......................... - Model 3
RCOMP Setting................................. - Model 1

Fine Delay Step Degree........................ - 70ps

Ch1 Clock Crossing Setting.................... - Auto
DIMM 1 Clock fine delay....................... - current 
DIMM 2 Clock fine delay....................... - current 
Ch1 Control0 fine delay....................... - current 
Ch1 Control1 fine delay....................... - current 
Ch1 Control2 fine delay....................... - current 
Ch1 Control3 fine delay....................... - current 
Ch1 Command fine delay........................ - current 

Ch2 Clock Crossing Setting.................... - Auto
DIMM 3 Clock fine delay....................... - current 
DIMM 4 Clock fine delay....................... - current 
Ch2 Control0 fine delay....................... - current 
Ch2 Control1 fine delay....................... - current 
Ch2 Control2 fine delay....................... - current 
Ch2 Control3 fine delay....................... - current 
Ch2 Command fine delay........................ - current 

Ch1Ch2 Common Clock Setting................... - Auto

Ch1 RDCAS GNT-Chip Delay...................... - Auto
Ch1 WRCAS GNT-Chip Delay...................... - Auto
Ch1 Command to CS Delay....................... - Auto

Ch2 RDCAS GNT-Chip Delay...................... - Auto
Ch2 WRCAS GNT-Chip Delay...................... - Auto
Ch2 Command to CS Delay....................... - Auto


Read Delay Phase Adjust

Ch1 Read delay phase (4~0)     
Channel 1 Phase 0 Pull-In..................... - Auto
Channel 1 Phase 1 Pull-In..................... - Auto
Channel 1 Phase 2 Pull-In..................... - Auto
Channel 1 Phase 3 Pull-In..................... - Auto
Channel 1 Phase 4 Pull-In..................... - Auto


Ch2 Read delay phase (4~0)     
Channel 2 Phase 0 Pull-In..................... - Auto
Channel 2 Phase 1 Pull-In..................... - Auto
Channel 2 Phase 2 Pull-In..................... - Auto
Channel 2 Phase 3 Pull-In..................... - Auto
Channel 2 Phase 4 Pull-In..................... - Auto



Voltage Setting

CPU VID Special Add........................... - +237.5mV
DRAM Voltage Control.......................... - 2.100V
SB Core/CPU PLL Voltage....................... - 1.55V
NB Core Voltage............................... - 1.1825
CPU VTT Voltage............................... - 1.10V
Vcore Droop Control........................... - Enabled
Clockgen Voltage Control...................... - 3.45V
CPU GTL 0/2 REF Volt.......................... - 0.67X
CPU GTL 1/3 REF Volt.......................... - 0.67X
North Bridge GTL REF Volt..................... - 0.67X
FSB Vref...................................... - 2A

Kalau mau lebih jelas mungkin bisa baca2 disini
http://www.clunk.org.uk/forums/overc...s-dfi-add.html

tes di vcore 1,36 bro vuat tembusin 4ghz

enak tuh VIDnya rendah

[brutal_soldier]

Tweet

udah ambil CM 212+ tadi siang bro...
main di 3.2ghz + orthos suhu maks di 56C
mayan turunnya...kemaren pake stok cooling nyampe 74C.